Posted  by  admin

T Slot Nz

Aluminium Extrusion Stocked Profiles T Slot Extrusion Openbeam extrusion V Slot Extrusions T slot Hardware 3d printer extrusion router extrusion bosch T slot extruded. Has a standard shaped 6mm T-SLOT longitudal groove on each face designed to accept standised shaped fixing components (Bolts, Nuts).

T Slot NzT Slot Nz

The Nut is a component of a fastening arrangement with a femalethread (on the inside). It normally has some shape or form on theoutside to assist with rotating it so that it will tighten onto amale part and typically come in a right handed thread (tightenedwhen turned in a clockwise direction). Note that some nuts areavailable that are left hand threaded (tightened when turnedanti-clockwise).

  • Hexagon Nuts
    Hex Nuts are the most commonly used nut for all types offastenings. They are available in metric coarse thread (standard),metric fine threads, Unified National Coarse (UNC), UnifiedNational Fine (UNF) and British Standard Whitworth (BSW). Metricsizes are made to the DIN 934 standard.

  • Nyloc Nuts
    Similar and complimentary to the hexagon range, the majordifference being the nylon ring inserted at the end of the nut.This is a self-locking device to stop the nut undoing underconstant vibration or load variations. It is not suitable for usewhere the temperature is liable to exceed 120 degrees Celsius. Foruses where high temperatures are incurred a range of spring metallock nuts are available in 304 grade only. Metric sizes are made tothe DIN 985 standard.

  • Dome Nuts
    (Acorn or Cap Nuts) come in two styles, one piece or two piece. Aone piece Dome Nut is made from a solid piece of stainless to DIN1587 Standards and the two piece is a hexagon nut with a dome capfused to one end and made with a high polish finish.

  • Lock Nuts, Half Nuts or Jam Nuts
    These are used under a Hex Nut or another Lock Nut to lock thefastening and stop it from undoing. They are similar to a Hex Nutbut not as high and in metric sizes are made to the DIN 439standard.

  • Wing Nuts
    The range and grades are similar to the hexagon nuts. These nutsare used in situations where a fastening is often undone and doneup but does not require an over tight fitting. The pressure thatcan be exerted by your fingers is sufficient to hold thefastening.

  • Hank Bushes
    These are internally threaded but with a round outside and with asmall reduced diameter shoulder. Designed for welding into sheetmetal fabrications so that a fastening can be used to hold firmlyin the sheet product.

  • Coupling Nuts
    These are very long hexagon nuts that are used to join two longthreads together and are made to DIN 6334 standard.

  • Flange Nuts
    Used mainly on concrete retaining type fastenings and automotive orsheetmetal fabrications. They are made for sheetmetal punching andare designed so that the 4 prongs and body come through from theback of timber and hold to stop the nut from rotating. They aremainly used in furniture/upholstery work.

  • Barrel Nuts
    Barrel Nuts have a long internal female thread and one end closedwith a drive. Either Philips, Slot or Socket.

  • Bumax Nuts
    Bumax Nuts are a range of higher tensile Stainless Steel hexagonnuts.

For Australian customers see StainlessSteel Nuts

Ullrich manufacture a range of tee extrusions . Tee 20mm to 100mm extrusions including split tees and sliding door tees.

Note: Red IndicatesMILL RUN ONLY, Non-Stocked Item. MINIMUM ORDER QUANTITY 200kg. Contact your local branch to enquire.

Search - dies, products and topics...

You can search for die numbers, product names and topics e.g. cladding

NEW ZEALAND
Download PDF

Click on a column heading to sort by that column

ExtrusionDIE No.DimensionsTypeDrawingWPIxIyMi
UA121620.00 x 20.00Tee0.16679.002361.001065.3034263.00
UA121720.00 x 20.00Tee0.29979.004020.822030.5560513.70
UA154322.22 x 12.70Tee0.27269.001137.762918.5440563.00
UA198725.00 x 25.00Tee0.20999.004723.112079.3668024.70
UA121825.00 x 25.00Tee0.38099.008188.883943.73121326.10
UA196725.00 x 38.00Tee0.200125.0011400.071555.85129559.20
UA422428.00 x 50.00Tee0.809152.0076576.107549.65841257.50
UA283030.00 x 22.00Tee0.270103.004245.214496.0787412.80
UA527835.00 x 50.00Tee0.692164.0064899.1110842.31757414.20
UA154438.10 x 19.05Tee0.238114.002435.537306.0897416.10
UA121940.00 x 40.00Tee0.623159.0035778.8016052.47518312.70
UA154540.00 x 40.00Tee0.917159.0050897.0424238.70751357.40
UA307140.00 x 40.00Tee1.198159.0064443.1932580.97970241.60
UA300340.00 x 50.00Tee1.389170.00120511.0931777.921522890.10
UA134444.50 x 25.50Tee0.450137.008469.7217740.33262100.50
UA448545.00 x 100.00Tee1.983285.00718581.3561194.077797754.20
UA305950.00 x 50.00Tee0.529199.0049013.9320817.27698312.00
UA195850.00 x 50.00Tee0.786199.0071442.8831307.921027508.00
UA626050.00 x 50.00Tee1.054195.0092998.2841840.041348383.20
UA122050.00 x 50.00Tee1.522199.00131198.7763243.641944424.10
UA706950.00 x 60.00Tee1.432214.00188304.5051939.042402435.40
UA527750.00 x 60.00Tee1.421214.00166922.4662768.362296908.20
UA300450.00 x 75.00Tee1.956240.00408456.6261970.704704273.20
UA672350.00 x 75.00Tee2.553243.00526152.8385949.246121020.70
UA451750.00 x 100.00Tee2.332299.00905101.9964058.179691601.60
UA617350.00 x 130.00Tee2.834354.001865149.1464309.6519294587.90
UA300550.00 x 150.00Tee4.175390.003589007.3887759.7936767671.70
UA278760.00 x 60.00Tee1.875234.00234130.38108970.683431010.60
UA499860.00 x 60.00Tee1.846239.00233198.91108902.453421013.60
UA672260.00 x 60.00Tee2.445233.00296771.04145741.764425128.00
UA696560.00 x 100.00Tee2.504316.00967822.50109552.6510773751.50
UA523865.00 x 100.00Tee3.409325.001287090.70186950.2314740409.30
UA243770.00 x 40.00Tee1.130215.0053215.95108237.011614529.60
UA171475.00 x 75.00Tee1.772298.00362205.38158642.775208481.50
UA584480.00 x 139.00Tee3.537432.002515953.87342603.2728585571.40
UA4234100.00 x 100.00Tee2.508399.00923366.21396987.9713203541.80

Diagrams actual size unless otherwise indicated. Diagrams are schematic only and are not intended as specification drawings.
OAD = Overall dimensions (mm)
P = External periphery (mm)
R = Radiused corner (mm)
W = Weight (kg/m)
Polar MI units mm4
Ix & Iy units mm4

Ullrich Aluminium Company Ltd, New Zealand

80 20 T Slot

Aluminium Castings - Aluminium Extrusions - Aluminium Finishes -Aluminium Ladders, Commercial - Building Products Division -Cladding, UlltraClad® -Decorative Metals -Download Brochures -Extruded Aluminium Bends -Manufactured Al Products -Fasteners -Marine Products -Sheet, Plate & Rollformed Aluminium -Welding Products - UlltraClad® Cladding -

T Slot Nz Videos

Company Profile - Contact Details -Sales Centres - News - Home - TOP